AquaSPArkle Chemicals

A top quality range of hot tub, spa and pool chemicals at value for money prices.

All prices are less postage and packaging (unless stated), for orders upto £39.99 the postage will be £4.95, orders upto £79.99 will be £6.95 orders over £80.00 will be free via courier. For small items please contact us we will be happy to charge postal rates.

AquaSPArkle bromine infused granules are highly effective granules for sanitation and algae control.

These granules are relatively pH neutral.

Contains: di-chloro-isocyanurate, dihydrate and sodium bromide. 500g

AquaSPArkle bromine infused granules are highly effective granules for sanitation and algae control.

These granules are relatively pH neutral.

Contains: di-chloro-isocyanurate, dihydrate and sodium bromide. 1kg

Low dusting 20g Spa Bromine Tablets

Contains: bromo-chloro-5, 5-dimethlhydantoin - 500gms.

Ideal for slow release use in a floating dispenser.

Low dusting 20g Spa Bromine Tablets

Contains: bromo-chloro-5, 5-dimethlhydantoin - 1 kg.

Ideal for slow release use in a floating dispenser.

These 20g chlorine tablets have a significantly higher pH than other spa chlorine tablets (ie they are significantly less acidic) and so they dramatically reduce the risk of acid damage to hot tub seals and equipment.

Contains flocculants and clarifiers.

AquaSPArkle Spa Cartridge Cleaner removes oils and grease that can easily build up on a filter cartridge, impairing performance.

Add the contents to 20 litres of water in a clean plastic container and soak filter(s) for a minimum of 8 hours or preferably overnight.

Formulated to prevent foaming caused by organic wastes, body lotions and other commonly used products.

Initial application: 100ml / per 1000 litres of spa water

Maintenance dose: Add weekly at the rate of 50ml per 1000 litres of spa water.

These chlorine free shock granules are ideal for regular application to the spa water to remove dissolved organic matter.

Compatible with Chlorine, Bromine and Active Oxygen sanitizers.

Active components: Potassium Peroxymonosulfate - 1kg

Hot tub water with very low total hardness (very soft water) can cause etching to occur on the tub surfaces which will become abrasive and uncomfortable for bathers.

Rough surfaces also increase the likelihood of problems with algae growth and make cleaning more difficult.

Hardness levels should be maintained between 100 - 200mg/l (ppm)

Many spa sanitisers do not perform efficiently if the pH of the water is not maintained within a specified range.

AquaSPArkle pH Minus is a granular formula. For best results it should be pre-dissolved in a small plastic container filled with spa water.

Add 10g (or approximately 2 teaspoons) of granular product to a litre of warm spa water and add the resulting solution to the spa whilst the pumps are turned on.

Hot tub water with very low pH (acidic water) can cause corrosion of your equipment and staining on the tub surfaces. It can also be very unpleasant to bath in. In addition many sanitisers do not perform efficiently if the pH of the water is not maintained within a specified range.

To raise the pH of spa water add 10g (or approximately 2 teaspoons) of granular product to a litre of warm spa water and add the resulting solution to the spa whilst the pumps are turned on.

Rapidly dissolving granules that have minimal impact on the pH of your hot tub water.

AquaSPArkle Surface Cleaner is a powerful, non-foaming cleaner that is compatible with all hot tub water sanitizing systems.

Use it to remove oil and dirt build up around the waterline and inside the skimmer and to clean the spa after draining.

Use with a non-abrasive spa cleaning pad.

This new product from AquaSPArkle cleans both inside and outside surfaces of your spa and cover for year-round protection and comes in a handy 250ml spray bottle.

AquaSPArkle Spa Sparkle adds lustre and clarity to spa water by effectively coagulating small particles into larger particles that can be removed by the filter.

Use 25ml per 1000 litres of spa water weekly.

Controls and removes scale, stains and deposits caused by mineral precipitation.

Apply the product directly into the spa water whilst the pumps are running.

Spas treated for heavy scale will require the filter cartridges to be cleaned a week after treatment.

Initial application: 25ml / per 1000 litres of spa water

Maintenance dose: Add weekly at the rate of 15ml per 1000 litres of Spa water.

Instant Filter Cleaner will quickly remove debris, oils, body fats and dirt using a unique "no soak" formula to minimise down time of your hot tub.

Simply remove the filter and rinse to remove surface dirt. Then spray the filter completely and leave to stand for 15 minutes.

Rinse again thoroughly before use.

System flushing is an essential requirement for all hot tubs and should be performed at least twice a year.

Aquasparkle Hot Tub Flush is an easy-to-use effective treatment that is proven to remove biofilm, dirt and other deposits from the inside of the hot tub plumbing system.

This kit contains the basics needed to get a spa up and running using bromine as a sanitizer.

The kit contains:

500g Bromine Granules

500g Spa pH Plus

750g Spa pH Minus

0.5 litre Spa Foam Away

50 3-Way Bromine Test Strips

Spa Water Care Guide

This kit contains the basics needed to get a spa up and running using chlorine as a sanitizer.

The kit contains:

500g Stabilised Chlorine Granules

500g Spa pH Plus

750g Spa pH Minus

0.5 litre Spa Foam Away

50 Chlorine Test Strips